
Add to Cart
IP67 Waterproof Led Street Light 100w High Power Led Street Light
No. | Item | Unit | Value |
1 | Power | W | 100 |
2 | Luminuox FLux | Lm | 10500 |
3 | Lighting Effect | Lm/W | 105 |
4 | Lamp Efficiency | - | >90% |
5 | Color Temperature | K | 2700-6500 |
6 | Color Rendering Index | - | Ra>70 |
7 | Working Humidity | RH | 10%—90%RH |
8 | Ambient Temperature | °C | -40~50 |
9 | Mounting Aperture | mm | Φ58-Φ62 |
10 | Installation Height | m | 6-9 |
11 | Beam Angle | degree | 140 |
12 | Input Voltage | V | 90~305AC |
13 | Frequency Range | HZ | 50/60 |
14 | Power Factor | - | >0.95 |
15 | IP Rating | - | IP67 |
16 | Weight | kg | 8.64 |
Applied to urban primary and secondary roads, expressways, traffic roads, country roads, plazas, factories, etc.
(1) Installation of street lamps and poles
Clamp installation: Insert the lamp post into the mounting hole (E position in the figure), and lock the four hexagon socket bolts “A, B, C, D”
Installation torque: screw torque is 12N·M (ABCD is M10*30 hex)
Projected area: 0.10㎡
Mounting height and elevation: Refer to the Technical Data section
Type C connection: Y-connection, the external flexible cable or cord of the luminaire is damaged, and the line should be replaced by the manufacturer or its service agent or a qualified person to avoid danger.
(2) Connect the reserved line of the street light interface to the light pole line. Note that the fire line, neutral line and ground line are connected as follows without clear identification:
Brown line → L
Blue line → N
Two-color line → G