Shenzhen DSF Science&Technology Co., Ltd.
Shenzhen DSF Science&Technology Co., Ltd. Drive Security Forward！
Add to Cart
CLEx Explosion-proof LED Head Light 3W 300Lm LED Headlamp with CE ROHS
| No. | Parameter | Unit | Value | |
| 1 | Rated Power | W | 3 | |
| 2 | Rated Capacity | Ah | 2.2 | |
| 3 | Light Source | Luminous Flux | lm | 300 |
| LifeSpan | h | 100,000 | ||
| 4 | Working Time | High Light | h | 5.5 |
| Weak Light | 12 | |||
| 5 | Charging Time | h | 6 | |
| 6 | Battery Life | Cycle | 1000 | |
| 7 | Dimensions | mm | 65*80*65 | |
| 8 | Weight | g | 90 | |
| 9 | IP Rating | - | IP65 | |
| 10 | Ex Mark | - | Ex d IIC T4 Gb | |
1. Before use, plug the plug of the dedicated charger into the charging hole on the side of the head light for charging.
The charger indicator is red when charging, and the indicator turns green when fully charged.
2. When using, press the switch to enter high light, press the second time to enter low light, press the third time to turn off,
if in the high light or low light mode, press for 1 second, then enter the strobe light.
3. The operation mode of the power detection function is: close the file and press the switch for 3 seconds to automatically enter the
power detection. The weak light flashes 5 times to indicate 80% power, the flash 4 times means 60% power, and the flash 3 times
means 40% power, flash 2 The number indicates less than 20% of the power, and one flash indicates that less than 10% of the battery
needs to be charged.
4. With real-time power monitoring display function, you can know the remaining battery power of the lamp at any time. The battery display
mode is: the LED light behind the lamp head turns on after the lamp is turned on, the battery power is higher than 30%, the green light is on,
and the battery power is lower than 30. When the red indicator is displayed, the red light is displayed. When the power indicator is red, the lamp
can only be used for about 1 hour. Please replenish the lamp in time after use.
5. It has stepless focusing function and stepless illumination direction. When focusing, please turn the front cover of the lamp head
by left or right on the lamp head to realize the focusing function. The lamp head can be adjusted by moving the lamp head up and down.
Focusing Function
Adjustable Function
6. There are a variety of wearing methods, which can be hand-held, waist-mounted and head-mounted. When hooking, hook the hook of the
headlight into the seat of the helmet or the headgear. The headgear can be adjusted according to your needs, that is, the E-shape on the
headgear can be loosened to adjust the length. If worn on a helmet, hook the four hooks on the headgear to the edge of the helmet to prevent it
from slipping.