Certified By DVG-GL IECEX LED Headlamp Explosion proof Lighting for T1~T4
Usage
● Battery installation and replacement (Figure 1)
● Open the battery box: Push the D2 with your thumb up, and the D1 will be loose. Open the batterycover and you can see that there are
3pcs AAA batteries inside.
● There are "+" pole and "-" pole mark in the battery slot, place the batteries into the battery slotaccording to the pole mark. Then put D1 into
the D2.Note: D2 is weak, do not use hard objects to insert/pry. Use the specificed battery which in the 4. list, donot reverse the polarity of the
battery.
● Working Mode Instruction (Figure 1)
(S2 black button)First press -> high light -> second press -> low light -> third press -> strobe light -> lastpress -> off
● Battery indicator (Figure 1) (S1 gray button)
Press the gray button for 3 seconds:If it flashes 5 times: 80% battery power remaining;If you flash 4 times: 60% battery power remaining;
If it flashes 3 times: 40% battery power remaining;If you flash 2 times: 20% battery power remaining.
● Adjustable Function (Figure 2)
Adjust angle from 0°to 120°as require.
Technical Parameters
| Item | Parameters |
| Power | 2W |
| Lumen Output | 178Lm |
| Lighting Modes | High-Low-Strobe |
| Battery | 3*AAA |
| Voltage | 3*1.5V |
| Working Time | High Light | 3h |
| Low Light | 6h |
| Irradiation Distance | 130m |
| Ambient Temperature | -20℃～+50℃ |
| Explosion-proof Grade | II 2G Ex ib op IIC T4 Gb |
| Waterproof Grade | IP65 |
| Dimension | 65*60*70mm |
| Weight | 80g |
Product Show
